Waveguide Products

Cernex 3dB Short Slot Hybrids Cernex’s CSH series short slot hybrid is a narrow wall 3 dB coupler, available in standard waveguide sizes from 18.0 to 110 GHz. This compact, four-port device is inherently matched and well suited for balanced mixers and power splitting circuits. more»
Cernex Adjustable Waveguide Short Circuits Cernex’s CAS series waveguide short circuits are available in standard waveguide sizes from 12.4 to 220 GHz. The non-contacting choke type short circuit is designed to operate with high electrical stability over a broad range of frequencies. more»
Cernex Direct Reading Frequency Meter Cernex’s CDM series direct reading frequency meters are available in standard waveguide sizes from 18.0 to 110.0 GHz and are designed to provide easy direct readout of frequency with a high degree of resolution and accuracy. more»
Cernex E-Plane Series & H-Plane Series Tees Cernex’s CTE series E-plane tees consist of a length of standard flanged waveguide with a perpendicular E-plane coupling arm symmetrically located on the broad waveguide wall. Input power is divided equally and in opposite phase between the two outputs. more»
Cernex E/H Plane Tuners Cernex’s CPT series E/H plane tuners are hybrid tee section available in standard waveguide sizes for operation from 12.4 to 220 GHz. The devices feature micrometer-driven tunable shorts in both the Eplane and H-plane arms for accurate tuning and reproducible settings. more»
Cernex Frequency Meters Cernex’s CMF series frequency meters are available in three standard waveguide sizes for operation over 90 to 220 GHz frequency range. Each unit is supplied with a calibration table and curve. The calibration is performed by using the micrometer-driven plunger to measure the distance between electrical resonances for a known frequency. more»
Cernex Matched Hybrid Tees & Unmatched Tees Cernex’s CMT series E/H hybrid tees consist of three mutually perpendicular flanged sections of a standard waveguide. Two of these sections are symmetrically located on the broad and narrow walls of the main tee section to provide E-plane and H-plane connections. The internal geometry of these hybrids provides a power-dividing and phase-inverting characteristic. more»
Cernex Rotary Joints Cernex’s CRJ series rotary joints are available in standard circular waveguide sizes from 11.6 to 150 GHz. Each rotary joint consists of two circular waveguide sections mounted on ball bearings. Connections to the guides are made at standard male and female circular flanges. more»
Cernex Single & Triple Hybrid Rings Cernex’s CHR series hybrid rings are four-port, inherently matched 3dB power splitting devices. Available in standard waveguide sizes from 18.0 to 220.0 GHz, these units are capable of both in-phase and out-of-phase splitting. more»
Cernex Waveguide Sections, Bends & Twists Cernex’s CSS, CWB, and CTS Series offered various waveguide components line to cover frequency range of 1 to 325 GHz in seven waveguide bands. Other frequency bands are available per request. more»

Registered in England and Wales Number: 2056049
Registered Office: Stowfield House, Upper Stowfield, Lydbrook, Gloucestershire, GL17 9PD
Tel: +44 (0) 1594 862200 Fax: +44 (0) 1594 862211
VAT Registration Number: GB 791 3120 44

Products & Solutions

Adapters & Transitions